Tools

Subcategories

Pumps

  • Proper frame preparation is very important. The HTR-1 combines reaming and facing for both head tube and unthreaded bottom bracket shells.

    735,28€
    Add to cart
    availability: In Stock

  • Proper frame preparation is very important. The HTR-1B combines reaming and facing for both head tube and unthreaded bottom bracket shells.

    712,30€
    Add to cart
    availability: In Stock

  • Many modern derailleur chains use a “master link" (also known as a "quick link" or "power link")that allows the chain to be installed and removed without driving out a rivet.

    22,96€
    Add to cart
    availability: In Stock

  • This tool is designed to quickly and easily “seat” stubborn tires. During inflation, tire beads often slip below the rim edgeand are difficult to pull out. Simply place the non-slip jaws on the tire and lift out. The Park Tool Tire Seater adjusts to various tire widths.

    87,06€
    Add to cart
    availability: In Stock

  • The RT-1 makes press fit headset and bottom bracket bearing cup removal easy. The tool is pulled through the frame untilthe flared ends snap in behind the cup.The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is driven out.Strong heat-treated alloy steel construction with nickel finish for a long...

    45,74€
    Add to cart
    availability: In Stock

  • The RT-2 makes headset bearing cup removal easy. The tool is pulled through the frame untilthe flared ends snap in behind the cup.The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is driven out.Strong heat-treated alloy steel construction with nickel finish for a long service life.

    46,86€
    Add to cart
    availability: In Stock

  • The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS-1, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight.Long handle helps prevent pinched fingers. The TNS-1 is for 1" and 1-1/8" headset systems.

    29,39€
    Add to cart
    availability: In Stock

  • The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems.Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time.

    56,31€
    Add to cart
    availability: In Stock

  • For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished.”To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must.An accurate and truly versatile wheel alignment gauge that belongs alongside every truing stand.

    77,00€
    Add to cart
    availability: In Stock

  • For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished.”The WAG-5 accurately gauges dish on 24 x 1⅜" to 29" wheels (ETRTO or ISO sizing of 547 to 630).Disassembles quickly for storage or travel and works with all hub types.

    52,63€
    Add to cart
    availability: In Stock

  • The CM-25 features a super tough die cast aluminum case and handle plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly.The proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use.

    144,57€
    Add to cart
    availability: In Stock

  • The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs.Quick-release design for fast tool installation and removal.

    493,94€
    Add to cart
    availability: In Stock