zł44.10
Nickel-plated wrenches can be used on brakes, derailleurs,CBW wrenches are nominally 1/8" (3.2mm) thick.
Filter By
Filter By
Filter By
zł44.10
Nickel-plated wrenches can be used on brakes, derailleurs,CBW wrenches are nominally 1/8" (3.2mm) thick.
zł67.60
The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle.
zł44.10
The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt.Double-ended to fit most slotted-type nuts.
zł156.70
The CSH-1 securely holds spokes in place during spoke tension adjustment to prevent wind-up of roundand bladed spokes, as well as rotation of straight-pull spokes.
zł44.10
The DCW-1 cone wrench 13/14mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
The DCW-2 cone wrench 15/16mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
The DCW-3 cone wrench 17/18mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
The DCW-4 cone wrench 13/15mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
A small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano® XT®, SLX®, Deore®, Saint® and Zee® rear Shadow® Plus (+) derailleurs...
zł70.50
A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy.Angled Shimano® Di2® E-TUBE® ends allow for both installation and removal in tight...
zł85.20
The HCW-11 fits slotted bottom bracket adjusting cups common on older English bicycles and less expensive bicycles with raised 16mm wrench flats.
zł113.60
Popular and universal Park Tool Head Wrench feature proven "Y" head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled...
zł162.60
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal.
zł100.80
The HCW-17 features two different radius hooks for a precise fit on most fixed-gear lockrings. The wrench has two different ends.
zł84.20
The HCW-18 is a double-ended wrench for use on some one-piece crank/bottom bracket systems.
English
Polski