zł734.00
The MWR-SET includes 6mm to 17mm wrenches featuring open ends and 12-point box ends with 72 tooth, two-way ratcheting mechanisms.
Filter By
Filter By
Filter By
zł57.80
Fast-release allen-key for Columbus thru-axlesIts special design allows the rider to keep the Switch-Lever on the axle even during the ride, or easily install/remove it before or after wheel tighteningCompatible with...
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł47.00
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł53.90
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł48.00
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł94.00
The BBT-10.2 removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding up crank removal.
zł116.60
The BBT-22 is a good quality tool for installing and removing Shimano® and ISIS Drive™ splined 20-tooth bottom bracket cups.
zł62.50
The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup.
zł155.80
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro® T47 & PF30 bottom brackets.
zł57.80
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The outside diameter of the BBT-5/FR-11 is 22.8mm.
zł175.40
The BBT-9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of bottom bracket cups.
zł406.70
A set of hex keys made of hardened steel with a handle. They have ergonomic "P" handles made of nylonand a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł645.80
A set of Torx wrenches made of hardened steel with a sliding "T" handle for more leverage. The set includes the following wrenches : T6, T8, T10, T15, T20, T25, T30 and T40.
zł203.70
Big and powerful, the PAW-12 adjustable wrench is forged from carbon steel and chrome plated.
zł218.40
An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-2.2 is intuitive and easy to use, and applies up to 60 Nm of torque to any...
zł511.60
TW-5.2 is a high quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is...
zł93.00
A multifunctional wrench for single speed bikes.15mm socket wrench for axle nuts.15mm open end wrench for pedals.Tire lever.Bottle opener.Length: 6.7" (17cm).
zł83.20
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł82.70
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł86.20
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł120.40
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł44.10
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
zł44.10
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
zł53.90
The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market. Nickel plated for years of service. Designed for the home mechanic.
zł44.10
A small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano® XT®, SLX®, Deore®, Saint® and Zee® rear Shadow® Plus (+) derailleurs...
zł64.60
The MWR-9 Ratcheting Metric Wrench 9mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł67.40
The MWR-10 Ratcheting Metric Wrench 10mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł85.20
The MWR-15 Ratcheting Metric Wrench 15mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł94.00
The MWR-17 Ratcheting Metric Wrench 17mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł135.50
High quality hex wrenches with a ball end on the long arm (except 10mm) for hard to reach bolts and a straight end on the short arm for high torque applications.
zł70.50
The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10).
zł56.70
Specially designed for cranks and pedals, the HT-8 Hex Tool is designed and built for speed, leverage and comfort.
zł122.50
Designed and built to remove and install Shimano® direct mount chainring lockrings found on XTR® 9120, XT® 8120, MT900, and other Shimano® direct mount systems. Precisely CNC machined from 6061...
zł57.80
Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon tool steel is used on each tool to ensure long life. Handle is vinyl coated to give...
zł68.50
The SW-14.5 is a forged double ended spoke wrench designed to fit select Shimano® wheels. Precision machined, plated and vinyl dipped for comfort and long life.
zł44.10
Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.
zł113.60
The BBT-18 is a heavy duty, investment cast tool for installing and removing the following:Shimano® Octalink® right side bottom bracket cup with external notchesBontrager® ISIS Drive™ bottom bracket...
zł55.90
The BSH-4 is a valuable wheel building and truing aid that securely holds bladed spokes to prevent twisting.
zł684.00
Designed and built specifically for a wide variety of bicycle hex work, the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches made for speed, efficiency, leverage and a perfect fit....
English
Polski