Tools

Subcategories

Pumps

  • The CRS-15.2 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts.

    $ 169.67
    Add to cart
    availability: In Stock

  • Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2, TS-2.2, TS-2.3, TS-4, or TS-4.2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor.

    $ 54.62
    Add to cart
    availability: In Stock

  • Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2"), as well as bottom bracket cups for PF41 (BB86, BB92), PF42 (BB30, OSBB), PF46 (PF30), Trek® BB90 & BB95, and one-piece crank systems.

    $ 117.73
    Add to cart
    availability: In Stock

  • Proper frame preparation is very important. The HTR-1 combines reaming and facing for both head tube and unthreaded bottom bracket shells.

    $ 800.81
    Add to cart
    availability: In Stock

  • Proper frame preparation is very important. The HTR-1B combines reaming and facing for both head tube and unthreaded bottom bracket shells.

    $ 800.81
    Add to cart
    availability: In Stock

  • Accurately measures seat posts, head tubes, bearings, spoke diameters, etc. The DC-1 is a precision instrument built with stainless steel mechanisms and a rugged ABS composite body. The tool’s ability to measure in metric, decimal inch, and fractional inch make it an indispensable shop tool.

    $ 79.86
    Add to cart
    availability: In Stock

  • Many modern derailleur chains use a “master link" (also known as a "quick link" or "power link") that allows the chain to be installed and removed without driving out a rivet.

    $ 20.86
    Add to cart
    availability: In Stock

  • This tool is designed to quickly and easily “seat” stubborn tires. During inflation, tire beads often slip below the rim edge and are difficult to pull out. Simply place the non-slip jaws on the tire and lift out. The Park Tool Tire Seater adjusts to various tire widths.

    $ 91.75
    Add to cart
    availability: In Stock

  • The RT-1 makes press fit headset and bottom bracket bearing cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is driven out. Strong heat-treated alloy steel construction with nickel finish for a long...

    $ 53.16
    Add to cart
    availability: In Stock

  • The RT-2 makes headset bearing cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is driven out. Strong heat-treated alloy steel construction with nickel finish for a long service life.

    $ 57.05
    Add to cart
    availability: In Stock

  • The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS-1, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers. The TNS-1 is for 1" and 1-1/8" headset systems.

    $ 27.40
    Add to cart
    availability: In Stock

  • The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time.

    $ 62.87
    Add to cart
    availability: In Stock