Filter By
Filter By
zł734.00
The MWR-SET includes 6mm to 17mm wrenches featuring open ends and 12-point box ends with 72 tooth, two-way ratcheting mechanisms.
zł377.30
Engineered for fit, function, and leverage, these shop quality Torx® compatible wrenches are a must have for every workshop.Includes T6, T8, T10, T15, T20, T25, T30, and T40.
zł63.60
Compact and lightweight multi tool with 7 function
zł54.80
The wrench is used for tightening and unscrewing screws with hex-shaped nuts.
Size: 2x2.5x3
The plastic-injected handle offers a comfortable and compact grip, which enables efficient working while the high-quality...
zł44.10
Detailed description
Manufacturer: Bike Hand
Model: YC-329
For 1, 7, 8, 9, 10 speed
Material: steel
Weight: 125g
zł57.80
Fast-release allen-key for Columbus thru-axlesIts special design allows the rider to keep the Switch-Lever on the axle even during the ride, or easily install/remove it before or after wheel tighteningCompatible with...
zł44.10
YC-626 Stainless steel
15MM wrench
3.2/3.5 mm spoke wrench
tire lever
bottle opener.
zł53.90
Manufacturer: Bike Hand
Model: YC-623
Hex Allen Key Set with ball-point
Sizes: 1.5/2/2.5/3/4/5/6/8/10mm
Material: high-quality steel
Color: silver
Ball hex ends allow up to a 25-degree entry angle to...
zł44.10
Folding Tool includes
Hex wrenches: 3/4/5/6/8mm
flat screwdriver
Philips screwdriver
aluminum black case
zł46.00
Folding Tool includes
Hex wrenches: 2/2.5/3/4/5/6/8mm
T25 Torx wrench
Philips screwdriver
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł44.10
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł51.80
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł47.00
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł53.90
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł48.00
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł48.00
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł47.80
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.
zł68.50
The 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
zł64.60
The 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
zł78.30
The 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
zł94.00
The BBT-10.2 removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding up crank removal.
zł86.10
The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM® and RaceFace® cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better...
zł116.60
The BBT-22 is a good quality tool for installing and removing Shimano® and ISIS Drive™ splined 20-tooth bottom bracket cups.
zł116.60
The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano® Dura-Ace® 9000 series and XTR® 980 series) as well as 16-notch...
zł84.20
Economical and compact, this version of the BBT-22 tool is perfect for the home mechanic. The BBT-32 installs and removes Shimano® and ISIS Drive™ 20-tooth splined bottom bracket cups and features 32mm...
zł62.50
The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup.
zł162.60
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Chris King® ThreadFit™ T47 & ThreadFit™ 30 bottom brackets
zł155.80
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro® T47 & PF30 bottom brackets.
zł57.80
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The outside diameter of the BBT-5/FR-11 is 22.8mm.
zł175.40
The BBT-9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of bottom bracket cups.
zł44.10
Nickel-plated wrenches can be used on brakes, derailleurs,CBW wrenches are nominally 1/8" (3.2mm) thick.
zł44.10
Nickel-plated wrenches can be used on brakes, derailleurs,CBW wrenches are nominally 1/8" (3.2mm) thick.
zł406.70
A set of hex keys made of hardened steel with a handle. They have ergonomic "P" handles made of nylonand a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł645.80
A set of Torx wrenches made of hardened steel with a sliding "T" handle for more leverage. The set includes the following wrenches : T6, T8, T10, T15, T20, T25, T30 and T40.
zł143.00
Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch® Gen 2 e-bike motors after the crank arm is removed.
zł171.50
Designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors.
zł134.20
Big and powerful, the PAW-6 adjustable wrench is forged from carbon steel and chrome plated.
zł203.70
Big and powerful, the PAW-12 adjustable wrench is forged from carbon steel and chrome plated.
zł162.60
Made of Cro-Moly steel, which makes the steel key wrench durable. 15mm and 9/16" precision openings and a long, round, vinyl dipped handle that won’t dig into your hand like flat pedal wrenches.
zł97.80
The PW-5 is perfect for the home workshop or event tool box.Made from heat-treated spring steel and vinyl dipped for comfort.
zł218.40
An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-2.2 is intuitive and easy to use, and applies up to 60 Nm of torque to any...
zł511.60
TW-5.2 is a high quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is...
zł685.00
The TW-6.2 is a high quality, ratcheting, click-type torque wrench that accurately measuresand applies the proper amount of torque to a component’s threaded fastener(s).Designed for higher torque settings for...
zł273.40
The BBT-30.4 Bottom Bracket Bearing Tool Set is designed and built to install and removethe bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright™, PF121 and other bottom bracketsystems using a 30mm spindle.
zł156.70
The CSH-1 securely holds spokes in place during spoke tension adjustment to prevent wind-up of roundand bladed spokes, as well as rotation of straight-pull spokes.
zł93.00
A multifunctional wrench for single speed bikes.15mm socket wrench for axle nuts.15mm open end wrench for pedals.Tire lever.Bottle opener.Length: 6.7" (17cm).
zł210.70
The preset torque driver that limits torque applied to fasteners up to 4Nm, preventing over-tighteningand damage to lightweight components. The PTD-4 features all metal internal construction with a comfortable,...
zł84.20
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł83.20
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł82.70
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł86.10
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł86.20
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł112.70
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł120.40
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł135.10
The hex wrench made of hardened steel with a sliding "T" handle creates increased leverageand multiple access positions.
zł113.60
Popular and universal Park Tool Head Wrench feature proven "Y" head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled...
zł162.60
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal.
zł142.10
The versatile Crank Wrench feature proven “Y” head design, 36mm box-end and bottom bracket pin spanner.
zł100.80
Double-sided bottom bracket lockring hook spanner. One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings.
zł78.30
The MT-1 is a high quality multi-tool that is uncomplicated, easy to use, and effective. Each of the nine tools is carefully positioned so the MT-1 can be effectively used on those “tough to get to” nuts,...
zł133.20
This spanner uses hardened, replaceable pins(1501) nominally 2.2mm in diameter. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes.
zł86.10
The three most common bolt and nut sizes are combined with the classic Park Tool 3-way “Y” body. 8mm, 9mm, and 10mm forged CR-V steel sockets.
zł100.80
The HCW-17 features two different radius hooks for a precise fit on most fixed-gear lockrings. The wrench has two different ends.
zł84.20
The HCW-18 is a double-ended wrench for use on some one-piece crank/bottom bracket systems.
zł67.60
The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle.
zł46.90
The 11mm hex wrench is necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).
zł44.10
The 12mm hex wrench is necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).
zł93.00
The 14mm hex wrench is used for crank bolts of the Campagnolo® Power Torque™ crankset and on freehub bodies from Shimano® XTR® and others.
zł146.90
The 15mm hex wrench is necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).
zł44.10
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
zł44.10
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
zł44.10
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
zł58.70
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.Park Tool Spoke Wrenches are vinyl coated in one of four colors indicating the size at a glance.
zł53.90
The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market. Nickel plated for years of service. Designed for the home mechanic.
zł71.30
The SW-11 is a forged double-ended spoke wrench designed to fit select Campagnolo® wheels. Fits Campagnolo® 5.5mm and 6.0mm hex spoke nipples.
zł68.50
The SW-12 is a forged double-ended spoke wrench designed to fit select Mavic® wheels usingintegrated M7 nipples.Smaller end fits nipples with a 6.4mm outside spline diameter commonly foundon R-sys wheels.Larger...
zł67.50
The SW-13 is a forged double-ended spoke wrench designed to fit select Mavic® wheels, including SSC Ksyrium and Crossmax SLR wheels.Smaller end fits nipples with a 5.5mm outside spline diameter commonly found on...
zł77.20
The SW-9 combines two common spoke nipple sizes, 0.127"/3.23mm/black (Park Tool SW-0) and 0.136"/3.45mm/red (Park Tool SW-2).
zł44.10
A small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano® XT®, SLX®, Deore®, Saint® and Zee® rear Shadow® Plus (+) derailleurs...
zł70.50
A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy.Angled Shimano® Di2® E-TUBE® ends allow for both installation and removal in tight...
zł67.60
The SW-16 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims.
zł67.60
The SW-16.3 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims.
zł67.60
The SW-17 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims.
zł67.60
The SW-18 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims.
zł67.60
The SW-19 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims.
zł61.60
The MWR-6 Ratcheting Metric Wrench 6mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł61.60
The MWR-7 Ratcheting Metric Wrench 7mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł63.50
The MWR-8 Ratcheting Metric Wrench 8mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł64.60
The MWR-9 Ratcheting Metric Wrench 9mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł67.40
The MWR-10 Ratcheting Metric Wrench 10mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł73.40
The MWR-11 Ratcheting Metric Wrench 11mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł74.40
The MWR-12 Ratcheting Metric Wrench 12mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł78.30
The MWR-13 Ratcheting Metric Wrench 13mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł84.20
The MWR-14 Ratcheting Metric Wrench 14mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł85.20
The MWR-15 Ratcheting Metric Wrench 15mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł90.10
The MWR-16 Ratcheting Metric Wrench 16mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł94.00
The MWR-17 Ratcheting Metric Wrench 17mm. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in blue vinyl for a comfortable grip.
zł84.20
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł84.20
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł81.20
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł82.20
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł83.20
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł84.20
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł88.10
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł105.70
Professional quality T-Handle star-shaped wrench. Sliding T-handle creates increased leverage and multiple access positions.Carefully selected combination of Chrome Vanadium and S-2 tool steels.Sliding T-handle...
zł135.50
High quality hex wrenches with a ball end on the long arm (except 10mm) for hard to reach bolts and a straight end on the short arm for high torque applications.
zł420.40
Includes 12 wrenches in a 12-point box/open-end combination from 6mm to 17mm.
zł67.00
The MWF-3 five-sided flare wrench head evenly spreads out the force being applied to the wrench, reducing the risk of damage to fasteners and brake hoses. Double-sided wrench features 7mm and 8mm wrench openings.
zł44.10
The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt.Double-ended to fit most slotted-type nuts.
zł44.10
The DCW-1 cone wrench 13/14mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
The DCW-2 cone wrench 15/16mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
The DCW-3 cone wrench 17/18mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł44.10
The DCW-4 cone wrench 13/15mm is designed for the home mechanic or occasional user. It is made of thin steel and is nickel plated and heat treated for long use.
zł48.00
OBW-3 has a 14mm opening, and the other end fits into the tension springs to rotate the brake on its bolt.
zł57.80
A thin offset wrench with 10, 11, 12, and 13mm openings made to fit and adjust many models of side pull and dual pivot brakes.
zł70.50
The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10).
zł44.10
The PH-2 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł44.10
The PH-25 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł44.10
The PH-3 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł44.10
The PH-4 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł44.10
The PH-5 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł48.80
The PH-6 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł65.60
The PH-8 hex wrench is made of hardened steel with a handle. It has an ergonomic "P" handle made of nylon and a Bondhus Balldriver tip that allows you to work with screws in hard-to-reach places.
zł50.90
Offset P-handle made from durable nylon and ergonomically designed for comfortable use.Made from through-hardened, high torque industrial steel for long life and precision fit.
zł85.20
The HCW-11 fits slotted bottom bracket adjusting cups common on older English bicycles and less expensive bicycles with raised 16mm wrench flats.
zł44.10
A long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket.Through-hardened industrial quality steel. Includes a ball end to access hard-to-reach areas.
zł51.80
Specially designed for pedals, HT-6 hex tool is designed and built for speed, leverage and comfort.
zł56.70
Specially designed for cranks and pedals, the HT-8 Hex Tool is designed and built for speed, leverage and comfort.
zł82.80
Specially designed for cranks, including the Campagnolo® Ultra-Torque™, the HT-10 hex tool is designed and built for speed, leverage and comfort.
zł151.90
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized®, Cannondale® and FSA® modular cranks.
zł122.50
Designed and built to remove and install Shimano® direct mount chainring lockrings found on XTR® 9120, XT® 8120, MT900, and other Shimano® direct mount systems. Precisely CNC machined from 6061...
zł182.20
The PW-4 Professional Pedal Wrench is designed for heavy shop use. An oversized, asymmetrical head is made from Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all...
zł57.70
Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon tool steel is used on each tool to ensure long life. Handle is vinyl coated to give...
zł57.80
Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon tool steel is used on each tool to ensure long life. Handle is vinyl coated to give...
zł44.10
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
zł68.50
The SW-14.5 is a forged double ended spoke wrench designed to fit select Shimano® wheels. Precision machined, plated and vinyl dipped for comfort and long life.
zł92.00
The innovative 3-way wrench features three different sized wrenches to fit internal spoke nipples.
zł44.10
Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.
zł47.00
Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.
zł113.60
The BBT-18 is a heavy duty, investment cast tool for installing and removing the following:Shimano® Octalink® right side bottom bracket cup with external notchesBontrager® ISIS Drive™ bottom bracket...
zł55.90
The BSH-4 is a valuable wheel building and truing aid that securely holds bladed spokes to prevent twisting.
zł684.00
Designed and built specifically for a wide variety of bicycle hex work, the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches made for speed, efficiency, leverage and a perfect fit....
zł84.20
The TWB-15 is used with any 3/8" drive torque wrench to verify pedals are torqued to the correct spec.
zł61.60
The TWB-36 is a crow foot style wrench used with any 3/8" drive torque wrench and drive tools with 36mm wrench flats such as Park Tool LRT-2, LRT-3, LRT-4 and BBT-18 to verify components are torqued to the correct...
zł136.20
The 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º.
zł293.00
The SBS-1.2 is a shop quality set of sockets, hex bits and Torx® compatible bits, selected specifically for common bike repair needs. Ideal for use with Park Tool Torque Wrenches, the SBS-1.2 3/8" drive bits and...
zł802.60
The 37 piece SBS-3 is a comprehensive, shop quality set of sockets, hex bits and Torx® compatible drivers selected specifically to tackle a wide variety of common bike repair needs.
zł117.50
The “Y” head design and all headset wrench (30mm and 32mm) openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat...
zł168.50
Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 48-50 mm and a minor diameter (inside of notches) of 46.4 mm, including: FSA® MegaEvo®, Wheels...
English
Polski